13
Sensor Memory Display
When the system is disarmed the turn signals will flash to indicate if there has been an alarm trigger.
The lights will flash once to indicate that the system has been disarmed, additional flashes indicate
that the following trigger has occurred:
1 flash then 1 additional flash = Shock Trigger
1 flash then 2 additional flashes = Tilt Trigger
1 flash then 3 additional flashes = Perimeter Sensor Trigger
1 flash then 4 additional flashes = Back-Up battery Trigger
1 flash then 5 additional flashes = Ignition Trigger
Motorcycle Battery Safeguard with “sleep mode”
• If the optional perimeter sensor is being used and the alarm is armed for more then 10 days the
system will automatically disable the perimeter sensor.
• If the alarm is armed for more than 30 days, the system will automatically shutdown its RF
capabilities. In this mode the transceiver will no longer be able to operate the system but the
system is still armed and protecting the bike.
• To disarm, trigger the alarm, and press button 2.
dditional Information
14
Programming Personal Override code (This feature will work on most but not all bikes)
A personal override code will be a sequence of left – right - left turn signal flashes that can be used if
the remote is lost to disable the alarm:
Enter programming Mode
1. Manually disarm system
2. Turn ignition on – off – on – off – on. The siren will chirp one time to confirm.
3. Press and hold button 1 and 2 at the same time for a few seconds until alarm chirps 3 times
and flashes lights 3 times to confirm.
Select number of flashes for Code
The code will be a combination of left-right-left-right turn signal count.
1. Turn on left turn signal to desired number of flashes. (up to 9)
2. Turn on right turn signal to desired number of flashes. (up to 9)
3. Turn on left turn signal to desired number of flashes. (up to 9)
4. Turn on right turn signal once to exit mode. (Will only register one flash)
5. When done, the remote will display the sequence on the screen
until a button is pressed or for up to 30 seconds.
6. The bike will flash the code in the same sequence entered.
Using code in case of lost remote
1. Turn ignition key to on position. Let alarm go thru a full cycle until the turn signal lights stop
flashing. (If siren is turned off, you do not need to wait for a full cycle)
2. Enter code as originally entered.
3. When correct code is entered the alarm will deactivate
Manual Override Procedure
(LCD screen will confirm code)
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels